After going through the
tutorials on the YouTube, finally i get the idea how to install the driver to
run the CC3200 launchpad on my laptop. The driver can be downloaded from the
Texas Instruments website (http://www.ti.com/tool/download/CC3200SDK).
Only the software with the arrow need to
be download and install. There is another software that needs to be download
which is the uniflash software to make sure the launchpad can be detected when
connected to the USB port. It is also can be download from the Texas Instruments website, https://www.ti.com/tool/uniflash.
Finally, after all of the installation
process is complete, the launchpad is recognized by the laptop as soon as it is
connected to the port. The connection can be check at the device manager as
shown in the picture below:
The estimation time for the installation process is
about 10-15 minutes but it may take longer than that depends on the storage and
internet connection.
No comments:
Post a Comment